- Manuals
- Brands
- Nanni Manuals
- Engine
- N4.60
- Instruction manual
Marine diesel engine
Hide thumbs Also See for N4.60:
- Operator's manual (67 pages)
-
- Contents
- Table of Contents
- Bookmarks
Advertisem*nt
Table of Contents
- 1 Technical Characteristics
- 2 Oil Level
- 3 Draining the Engine Oil
- 4 Installation Inspection
- 5 Instrument Panel
- Download this manual
See also: Operator's Manual
Instruction manual
Marine Diesel engine
N4.60
13122011-D
MU_N4.60_970313256_ENG
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Nanni N4.60
-
Engine Nanni N2.10 Operator's Manual
Marine engine (67 pages)
-
Engine Nanni N4.115 Operator's Manual
(66 pages)
-
Engine Nanni N3.30 Workshop Manual
(129 pages)
-
Engine Nanni N3.21 Instruction Manual
Marine diesel engine (13 pages)
-
Engine Nanni N2.10 Operator's Manual
Marine engine (68 pages)
-
Engine Nanni N4.40 Workshop Manual
(176 pages)
-
Engine Nanni N5.160 CR2 Operator's Manual
(104 pages)
-
Engine Nanni N16.900 CR3 Operator's Manual
(119 pages)
-
Engine Nanni N13.700 CR3 HD Operator's Manual
(121 pages)
-
Engine Nanni N13.430 CR2 Operator's Manual
(110 pages)
-
Engine Nanni N6.285 CR2 Operator's Manual
(102 pages)
-
Engine Nanni N4.65 Operator's Manual
(94 pages)
-
Engine Nanni N9.330 CR2 Operator's Manual
(108 pages)
-
Engine Nanni 2.40 HE Operating Instructions Manual
Marine diesel engine (60 pages)
-
Engine Nanni 6.420TDI Instruction Manual
(16 pages)
-
Engine Nanni 3.100 HE Instruction Manual
(10 pages)
Summary of Contents for Nanni N4.60
- Page 1 Instruction manual Marine Diesel engine N4.60 13122011-D MU_N4.60_970313256_ENG...
-
Page 2: Technical Characteristics
Technical characteristics ENGINE SPECIFICATIONS N4.60 Cycle 4 strokes, Diesel Max. power - kW (hp)* 44.2 (60) Number of cylinders / Arrangement 4 in line Displacement (cm3) 1 999 Fuel timing before TDC (°) Compression rate 22:1 Aspiration Turbocompressor Bore x stroke (mm) 83 x 92.4... - Page 3 Main parts of the engine Non-binding photographs. The coupled equipment and accessories can vary according to your level of equipment. 1. Alternator 12. Oil fi lter 2. Alternator belt 13. Heat exchanger 3. Starter 14. Coolant fi ller port 4. Air fi lter 15.
-
Page 4: Oil Level
Then, rinse the fi lter with clear water. Press the fi lter to remove any water and to dry it. NANNI DIESEL has designed a cleaning kit which is suited to certain models of air fi lters. - Page 5 Inspection and adjustment of the levels Fuel fi lter Attention ! : Always sponge up any fuel which may have spilled Observe the environment protection rules. A. Fuel fi lter cartridge The fuel fi lter is a throw-away type fi lter. The fi reguard envelope and the water probe must be preserved and reinstalled correctly (if equipped).
- Page 6 Inspection and adjustment of the levels Alternator belt Warning !: Perform this operation with the engine stopped. A. Alternator B. Alternator belt Regularly check the tensions of the alternator belt. Tension the belt between the pulleys in accordance with the tension or defl...
- Page 7 Inspection and adjustment of the levels Coolant level Warning !: When fi lling the cooling system, the coolant level must be checked after 10 minutes of use since the system purges itself automatically. Top up if necessary. A. Coolant plug Turn the fi...
-
Page 8: Installation Inspection
Installation Inspection Warning! : Your engine must be installed by an authorised shipyard or a qualifi ed Nanni Industries representative in accordance with the on board assembly instructions. However, you can check some important points on the installation of the engine. However, your installation can be different than the one that is indicated in this chapter. - Page 9 Installation inspection Fuel supply system Pump Max height (m) The fuel tank of the engine must be placed as possible at the same level or slightly higher than the engine. Standard pump The return pipe must be placed under the mini level of the fuel tank.
-
Page 10: Instrument Panel
Instrument panel The instrument panel provides you with important information on the engine when it is in operation. Regularly check this information when the engine is running. 2 ranges of instruments panels are available. Only the position and / or appearance of the instruments and / or the icons vary depending on the type of panel. - Page 11 Instrument panel Eco3 Eco4 ON / STOP START STOP RPM x 100 ON / STOP START STOP RPM x 100 ON / STOP START °C °F STOP RPM x 100 ON / STOP START °C °F STOP...
- Page 12 E-mail : contact@nannidiesel.com © 2009 - Nanni Industries SAS The images, text and information contained in this document are based on the product’s features at the time of publication. Nanni Diesel reserves the right to modify this document without prior notice.
This manual is also suitable for:
N4.85N4.115
